Thombert Press-On Steer Tire 10 x 7 x 6.25 – 10160 B

Thombert Press-On Steer Tire 10 x 7 x 6.25 – 10160 B

$212.50

Press-on polyurethane forklift tire, 10 x 7 x 6.25 in (outside diameter x width x inside diameter), for Crown and Raymond electric lift trucks. It presses onto the wheel band with a steel mounting ring and runs with the low rolling resistance, non-marking contact, and long wear that make poly the standard tire for clean indoor electric-truck work. It is a steer-axle tire for precise, low-effort turning.

Thombert Press-On Steer Tire 10 x 7 x 6.25 – 10160 B

Mounted at the steer axle, this Thombert press-on tire measures 10 inches in outside diameter on a wide 7 inch tread with a 6.25 inch inside mounting diameter, built from polyurethane bonded to a steel press-on band. The 7 inch tread width matters at the steer position, where a broad contact patch steadies the truck and gives the operator predictable response through turns under load. Polyurethane holds its shape and resists chunking on smooth warehouse floors, carrying steer-axle load without the deflection of a pneumatic.

This size is documented to fit Crown, Raymond, and Toyota electric lift trucks. It mounts by hydraulic press-on interference fit, seating onto a matching wheel band under press force rather than bolting in place.

On a press-on tire the inside mounting diameter is the fit-critical measurement, since the tire holds only by the interference between its band and the wheel. Confirm the band on the truck measures 6.25 inches before pressing, because a mounting diameter off size will not seat the tire square or let it carry its steer-axle load.

SKU 10160 B
Product ID 11328
Category , ,
Brand ,
Weight 24 lbs
Dimensions 1" L × 7" W × 1" H
Thombert Press-On Steer Tire 10 x 7 x 6.25 – 10160 B
Specifications
Part Type Press-On Tire
Manufacturer Thombert
Construction Polyurethane tread
Outside Diameter 10 in
Width 7 in
Bore 6.25 in
Sold As Each
Weight (lbs) 24.00
Length (in) 10.00
Width (in) 7.00
Height (in) 10.0
Product measurements are for shipping calculations only, and may vary. For questions about product sizes and shipping information, contact customer service.

These are the identifiers for this product. The SKU is the part number we use at Forklifts Etc. when you order. Below that you’ll also see the product ID, the OEM number when we have it, and cross-reference part numbers other manufacturers use for the same item.

SKU Number 10160 B
Product ID 11328
Short Link https://forkliftsetc.net/?p=11328
Cross-Reference Part Numbers
Part Number
00590-44440-71
00590-44564-71
310015
632-099
DS225595
10160B

Related Items: