$135.30
Thombert Dyalon A polyurethane gives this press-on drive tire its load rating and abrasion resistance across a 10 inch outside diameter, 5 inch width, and 6.5 inch inside diameter, with the tread bonded to a steel band. It carries sustained drive-position load on hard floors while resisting cutting, chunking, and heat. Documented fitment spans Allis Chalmers, BT, Clark, Crown, Hyster, Linde, Raymond, Toyota, Unicarriers, and Yale.
Thombert Dyalon A polyurethane gives this press-on drive tire its load rating and abrasion resistance across a 10 inch outside diameter, 5 inch width, and 6.5 inch inside diameter, with the tread bonded to a steel band for a permanent interference fit onto the wheel. Dyalon A is one of Thombert's polyurethane compounds, formulated to carry sustained drive-position load on hard floors while resisting the cutting, chunking, and heat that break down a softer tire.
Thombert's OEM cross-reference documents this drive tire fitting a broad range of electric lift lines, including Allis Chalmers, BT/Prime Mover, Clark, Crown, Hyster, Linde/Baker, Raymond, Toyota, Unicarriers, and Yale. That coverage makes it a high-turnover service part for any shop maintaining a mixed fleet. It is supplied as the tire on its band without bearings, so the truck's existing bearings are reused at installation.
Because the tire seats by interference fit, the 6.5 inch inside diameter has to match the band it mounts to. Match the band diameter on the truck before pressing this drive tire on, since a tire cut for one size will not seat on another.
| SKU | 10120 A0 |
|---|---|
| Product ID | 15446 |
| Category | Press-On Poly, Tires, Tires & Wheels |
| Brand | Crown |
| Weight | 17.2 lbs |
| Dimensions | 1" L × 5" W × 1" H |
| Part Type | Press-On Tire |
|---|---|
| Manufacturer | Thombert |
| Compound | Dyalon A polyurethane |
| Outside Diameter | 10 in |
| Width | 5 in |
| Bore | 6.5 in |
| Configuration | Wheel only, no bearings |
| Sold As | Each |
| Weight (lbs) | 17.20 |
| Length (in) | 10.00 |
| Width (in) | 5.00 |
| Height (in) | 10.0 |
These are the identifiers for this product. The SKU is the part number we use at Forklifts Etc. when you order. Below that you’ll also see the product ID, the OEM number when we have it, and cross-reference part numbers other manufacturers use for the same item.
| SKU Number | 10120 A0 |
|---|---|
| Product ID | 15446 |
| Short Link | https://forkliftsetc.net/?p=15446 |
| Part Number |
|---|
| 00590-46881-71 |
| 139191 |
| 2309954 |
| 2778705 |
| 3021924 |
| 3022554 |
| 307922-000 |
| 310012 |
| 3120636 |
| 338603 |
| 40265-00 |
| 502036002 |
| 504919500 |
| 504919501 |
| 632-090 |
| 708398 |
| 74818436 |
| 991012 |
| A13076-008 |
| 10120A0 |
