Thombert Press-On Tire 10 x 5 x 6.5 for Hyster and Raymond – 10125-A

Thombert Press-On Tire 10 x 5 x 6.5 for Hyster and Raymond – 10125-A

PID: 12131

$165.00

Press-on polyurethane forklift tire, 10 x 5 x 6.5 in (outside diameter x width x inside diameter), for Crown electric lift trucks. It presses onto the wheel band with a steel mounting ring and runs with the low rolling resistance, non-marking contact, and long wear that make poly the standard tire for clean indoor electric-truck work. The center-groove tread channels debris and adds traction over a smooth tire.

Thombert Press-On Tire 10 x 5 x 6.5 for Hyster and Raymond – 10125-A

Thombert molds a center groove into the tread of this press-on tire, formed in polyurethane at a 10 inch outside diameter with a 5 inch width and a 6.5 inch inside mounting diameter. The groove splits the contact patch and clears debris and moisture from under the tire, while the polyurethane tread carries the rolling load of an electric lift truck and resists the cutting and chunking that ends a softer tire early. The tread is bonded to a steel band that presses onto the wheel under a hydraulic interference fit.

Documented against Thombert's OEM cross-reference table, this size fits Hyster and Raymond lift trucks. The 6.5 inch inside mounting diameter is the fit-critical dimension, so match it to the wheel band the tire presses onto before installation; a band that does not match the inside diameter will not seat the tire under load. As a center-groove tire it is a direct replacement for the grooved unit it comes off, keeping the same tread pattern on the truck.

SKU 10125-A
Product ID 12131
Category , ,
Brand
Weight 17 lbs
Dimensions 1" L × 5" W × 1" H
Thombert Press-On Tire 10 x 5 x 6.5 for Hyster and Raymond – 10125-A
Specifications
Part Type Press-On Tire
Manufacturer Thombert
Construction Polyurethane tread
Outside Diameter 10 in
Width 5 in
Bore 6.5 in
Bore Depth Smooth-Grooved in
Sold As Each
Weight (lbs) 17.00
Length (in) 10.00
Width (in) 5.00
Height (in) 10.0
Product measurements are for shipping calculations only, and may vary. For questions about product sizes and shipping information, contact customer service.

These are the identifiers for this product. The SKU is the part number we use at Forklifts Etc. when you order. Below that you’ll also see the product ID, the OEM number when we have it, and cross-reference part numbers other manufacturers use for the same item.

SKU Number 10125-A
Product ID 12131
Short Link https://forkliftsetc.net/?p=12131
Cross-Reference Part Numbers
Part Number
3021924
632-090/03
10125-A

Related Items: