$165.00
Press-on polyurethane forklift tire, 10 x 5 x 6.5 in (outside diameter x width x inside diameter), for Crown electric lift trucks. It presses onto the wheel band with a steel mounting ring and runs with the low rolling resistance, non-marking contact, and long wear that make poly the standard tire for clean indoor electric-truck work. Confirm the tread pattern and compound for your floor before ordering.
Thombert presses this Dyalon A polyurethane tire onto a bonded steel band to build a 10 inch press-on tire, 5 inches across the tread on a 6.5 inch mounting bore that sets the interference fit onto the wheel. Dyalon A is Thombert's polyurethane compound, chosen for the load capacity and cut resistance that keep a press-on tire in service through the start, stop, and turning loads of daily electric lift truck work.
The tread runs a smooth grooved profile, shedding fines and debris off finished floors while keeping most of the contact patch on the ground, and at 18 pounds the tire is sized for a compact truck or a load position. It seats by hydraulic press, driving the band onto the wheel under interference so the two turn as one with no fasteners to loosen. This Thombert tire is documented to fit Hyster and Raymond lift trucks.
Match the mounting bore to the wheel diameter before pressing the tire on, since a press-on tire holds only by interference and will not stay seated on a wheel cut to a different size. Forklifts Etc. carries this tire as a direct replacement for the worn press-on it takes off.
| SKU | 10125-AO |
|---|---|
| Product ID | 11573 |
| Category | Press-On Poly, Tires, Tires & Wheels |
| Brand | Crown |
| Weight | 17 lbs |
| Dimensions | 1" L × 5" W × 1" H |
| Part Type | Press-On Tire |
|---|---|
| Manufacturer | Thombert |
| Compound | Dyalon A polyurethane |
| Outside Diameter | 10 in |
| Width | 5 in |
| Bore | 6.5 in |
| Bore Depth | Smooth-Grooved in |
| Configuration | Wheel only, no bearings |
| Sold As | Each |
| Weight (lbs) | 17.00 |
| Length (in) | 10.00 |
| Width (in) | 5.00 |
| Height (in) | 10.0 |
These are the identifiers for this product. The SKU is the part number we use at Forklifts Etc. when you order. Below that you’ll also see the product ID, the OEM number when we have it, and cross-reference part numbers other manufacturers use for the same item.
| SKU Number | 10125-AO |
|---|---|
| Product ID | 11573 |
| Short Link | https://forkliftsetc.net/?p=11573 |
| Part Number |
|---|
| 3021924 |
| 632-090/03 |
| 10125-AO |
