$212.50
Press-on polyurethane forklift tire, 10 x 7 x 6.25 in (outside diameter x width x inside diameter), for Crown electric lift trucks. It presses onto the wheel band with a steel mounting ring and runs with the low rolling resistance, non-marking contact, and long wear that make poly the standard tire for clean indoor electric-truck work. Confirm the tread pattern and compound for your floor before ordering.
Thombert presses this polyurethane forklift tire from Dyalon A compound onto a steel band sized 10 inches in outside diameter, 7 inches wide, with a 6.25 inch inside mounting diameter. The Dyalon A polyurethane gives the tread the load capacity and abrasion resistance an electric lift truck demands across a full shift, resisting the chunking and flat-spotting that shorten the life of a softer tread. Mounting is a hydraulic press-on interference fit, so the tire seats permanently onto a matching wheel band rather than bolting or clamping.
This size is documented to fit Raymond and Yale electric lift trucks, where the wide 7 inch tread spreads load and steadies the truck under a raised carriage. Thombert supplies it as the tire only, so the buyer presses it onto an existing band or hub.
Because a press-on tire holds by interference fit, the inside mounting diameter has to match the band it seats on. Confirm the 6.25 inch bore against the wheel or hub before pressing, since a band undersized or oversized will not seat square or carry its rated load. Forklifts Etc. lists this Thombert tire by its true pressed dimensions so the swap matches the part coming off.
| SKU | 10162-AO |
|---|---|
| Product ID | 11195 |
| Category | Press-On Poly, Tires, Tires & Wheels |
| Brand | Crown |
| Weight | 24 lbs |
| Dimensions | 1" L × 7" W × 1" H |
| Part Type | Press-On Tire |
|---|---|
| Manufacturer | Thombert |
| Compound | Dyalon A polyurethane |
| Outside Diameter | 10 in |
| Width | 7 in |
| Bore | 6.25 in |
| Bore Depth | Smooth-Grooved in |
| Configuration | Wheel only, no bearings |
| Sold As | Each |
| Weight (lbs) | 24.00 |
| Length (in) | 10.00 |
| Width (in) | 7.00 |
| Height (in) | 10.0 |
These are the identifiers for this product. The SKU is the part number we use at Forklifts Etc. when you order. Below that you’ll also see the product ID, the OEM number when we have it, and cross-reference part numbers other manufacturers use for the same item.
| SKU Number | 10162-AO |
|---|---|
| Product ID | 11195 |
| Short Link | https://forkliftsetc.net/?p=11195 |
| Part Number |
|---|
| 150102686 |
| 632-099 |
| 10162-AO |
