Thombert Press-On Tire 12 x 5 x 9 – ST-10334

Thombert presses this polyurethane tire to a 12 inch outside diameter over a 5 inch width, with a 9 inch bore that has to match the wheel it mounts to for the tire to seat and hold under load. The bore is the governing measurement, since a press-on tire seats only on the wheel diameter it was pressed to match. Polyurethane gives this tire the load capacity and cut resistance a hard-surface duty cycle demands, wearing evenly across the tread rather than chunking the way a softer compound does under a loaded electric truck.

Documented fitment covers BT/Prime Mover, Crown, MCFA, Raymond, and Unicarriers lift trucks, so one tire serves a mixed electric fleet across several brands. The smooth tread profile runs on the swept warehouse and dock floors these trucks work, laying the full contact patch to the ground for traction and stability with a load up.

Measure the 9 inch bore against the wheel the tire presses onto before installing, since a press-on tire will not seat on a wheel it was not sized for. Forklifts Etc. carries this Thombert tire as a direct replacement for the worn press-on coming off the wheel.