$684.75
Drive unit combining the traction motor and reduction gearing that powers Raymond electric lift trucks. It delivers torque to the drive wheel through the truck's final drive. Worn gears or bearings show up as whine, vibration, or play before failure.
This drive gear and pinion set handles power transfer inside the drive unit of Raymond electric lift trucks. The pinion meshes with the larger drive gear to step motor speed down into the higher torque a loaded truck needs at the wheel. Because the two parts run as a matched pair, replacing them together keeps tooth contact even and quiet, which protects the gears from the uneven wear that follows when only one component is swapped. Precise tooth geometry and hardened surfaces let the set carry repeated start and stop loads across a full shift. Confirm the set matches your Raymond drive unit before ordering.
| SKU | RA400-204 |
|---|---|
| Product ID | 15538 |
| OEM Number | RA400-204 |
| Category | Gears & Pinions, Transmission |
| Brand | Raymond |
| Weight | 8.75 lbs |
| Dimensions | 1.75" L × 1.5" W × 6.2" H |
| Type | Drive gear and pinion set |
|---|---|
| Equipment | Raymond lift trucks |
| Manufacturer Part Number | RA400-204 |
| Weight (lbs) | 8.75 |
| Length (in) | 1.75 |
| Width (in) | 1.50 |
| Height (in) | 6.2 |
These are the identifiers for this product. The SKU is the part number we use at Forklifts Etc. when you order. Below that you’ll also see the product ID, the OEM number when we have it, and cross-reference part numbers other manufacturers use for the same item.
| SKU Number | RA400-204 |
|---|---|
| Product ID | 15538 |
| Short Link | https://forkliftsetc.net/?p=15538 |
| OEM Number | RA400-204 |
| Part Number |
|---|
| 800131463 |
| AC312177-000 |
| ACOP03000166 |
| CTNA015234 |
| CTNA15234 |
| E-7298 |
| ET17569 |
| KO312177-000 |
| KOOP03000166 |
| LP566-1033 |
| MBNA015234 |
| RA-400-204 |
| RA400-204 |
| RADS237111 |
