$9.32
This roller runs within the Crown upright, turning against its mating surface as the mast raises and lowers to support and guide moving mast components through lift travel. By replacing sliding friction with smooth rotation, it lets the assembly move freely under load and keeps motion even, holding the mast aligned for consistent lift action and steady wear across the running surface. Made for Crown lift trucks.
This roller runs within the Crown upright, turning against its mating surface as the mast raises and lowers. It provides a rolling contact point that supports and guides moving mast components through lift travel, replacing sliding friction with smooth rotation so the assembly moves freely under load. A roller in good condition keeps motion even and holds the assembly aligned, which promotes consistent lift action and steady wear across the running surface. It is made for Crown lift trucks and fits the roller position it was built for within those uprights. Confirm the roller diameter and width against the part you are replacing before installation.
| Type | Roller |
|---|---|
| Equipment | Crown lift trucks |
| Manufacturer Part Number | CR128801-002 |
| Weight (lbs) | 0.10 |
| Length (in) | 1.10 |
| Width (in) | 1.10 |
| Height (in) | 0.1 |
These are the identifiers for this product. The SKU is the part number we use at Forklifts Etc. when you order. Below that you’ll also see the product ID, the OEM number when we have it, and cross-reference part numbers other manufacturers use for the same item.
| SKU Number | CR128801-002 |
|---|---|
| Product ID | 14901 |
| Short Link | https://forkliftsetc.net/?p=14901 |
| OEM Number | CR128801-002 |
| Part Number |
|---|
| CR128801-002 |
| CR128801-2 |
| SY78105 |
| TSA-CR128801-002 |
| TSA-CR128801-2 |
| TSA-SY78105 |
