$24.34
Mounted in the mast of Raymond lift trucks, this pulley acts as a sheave that carries the lift chain over its bearing as the carriage moves. Its machined groove seats the chain and keeps it tracking correctly, spreading load and limiting side wear during repeated lifts. As the pulley ages, the bearing can bind and the groove can round out, leading to rough travel and added strain on the chain.
Carrying the lift chain over its bearing as the carriage rises and falls, this mast pulley acts as a sheave that keeps the chain tracking through the lift cycle. Its machined groove seats the chain and guides it, spreading the load across the sheave face and limiting the side wear that comes from a chain riding off-center.
As the pulley ages, the bearing can bind and the groove can round out, which shows up as rough or noisy carriage travel and added strain on the chain itself. Installing a fresh sheave returns smooth, even chain motion and protects the surrounding mast hardware from premature wear. Match the bore, the outside diameter, and the groove width to the chain and shaft on the mast being serviced, since sheave sizing governs how the chain seats and tracks.
| SKU | RA1082105 |
|---|---|
| Product ID | 11045 |
| Category | Forks, Pulleys & Sheaves, Upright |
| Brand | Raymond |
| Weight | 1.5 lbs |
| Dimensions | 1.6" L × 0.6" W × 0.5" H |
| Type | Pulley |
|---|---|
| Equipment | Raymond lift trucks |
| Weight (lbs) | 1.50 |
These are the identifiers for this product. The SKU is the part number we use at Forklifts Etc. when you order. Below that you’ll also see the product ID, the OEM number when we have it, and cross-reference part numbers other manufacturers use for the same item.
| SKU Number | RA1082105 |
|---|---|
| Product ID | 11045 |
| Short Link | https://forkliftsetc.net/?p=11045 |
| Part Number |
|---|
| RA1082105 |
