$38.35
Raymond stud, a threaded fastener used on Raymond lift trucks to anchor and align mating components at a mounting point. Threaded on one or both ends, it seats into its base and accepts a nut to draw the joint tight, holding parts in correct position under load and vibration. A stretched, corroded, or damaged stud can loosen the connection and let components shift, and a sound replacement restores secure clamping.
Threaded on one or both ends, a stud seats permanently into a tapped base and accepts a nut on the exposed end to draw a joint tight, anchoring and aligning mating components at a mounting point. The fixed end holds position while the nut end lets a part be clamped and removed without disturbing the anchor.
A stud that has stretched, corroded, galled, or damaged its threads loosens the connection and lets the clamped parts shift under load and vibration. A sound replacement restores secure clamping and correct alignment. Match the thread size and pitch on both ends, the overall length, and the grade to the stud being replaced, since a stud wrong in any of these will not seat or hold the joint.
| Type | Stud |
|---|---|
| Equipment | Raymond lift trucks |
| Weight (lbs) | 1.00 |
These are the identifiers for this product. The SKU is the part number we use at Forklifts Etc. when you order. Below that you’ll also see the product ID, the OEM number when we have it, and cross-reference part numbers other manufacturers use for the same item.
| SKU Number | RA1048147 |
|---|---|
| Product ID | 11269 |
| Short Link | https://forkliftsetc.net/?p=11269 |
| Part Number |
|---|
| RA1048147 |
