$4.30
Yale upright bumper for Yale lift trucks, cushioning the upright where mast sections or the carriage reach the end of travel. Made to take repeated contact, it softens the stop so metal does not strike metal, which reduces shock through the mast and quiets lift and lower cycles. A bumper holds its shape and stays seated, protecting the surrounding mast hardware from the wear that hard contact would cause.
This bumper cushions the upright on Yale lift trucks, absorbing the impact where mast sections or the carriage reach the end of travel. Made to take repeated contact, it softens the stop so metal does not strike metal, which reduces shock through the mast and quiets lift and lower cycles. A bumper in good condition holds its shape and stays seated, protecting the surrounding mast hardware from the wear that hard contact would cause. It fits Yale lift trucks and matches the upright location it was designed for. Check the bumper size and mounting against the worn part before installation.
| Type | Bumper |
|---|---|
| Equipment | Yale lift trucks |
| Manufacturer Part Number | HY2050084 |
| Weight (lbs) | 0.15 |
These are the identifiers for this product. The SKU is the part number we use at Forklifts Etc. when you order. Below that you’ll also see the product ID, the OEM number when we have it, and cross-reference part numbers other manufacturers use for the same item.
| SKU Number | HY2050084 |
|---|---|
| Product ID | 12128 |
| Short Link | https://forkliftsetc.net/?p=12128 |
| OEM Number | HY2050084 |
| Part Number |
|---|
| 800138270 |
| HY2050084 |
| HY524149326 |
| SY81248 |
| SY99-00452 |
| YT2050084 |
| YT524149326 |
