Thombert Press-On Tire 13 x 5.5 x 9.5 for Crown – 10326-B2

Thombert Press-On Tire 13 x 5.5 x 9.5 for Crown – 10326-B2

PID: 11077

$190.99

Press-on polyurethane forklift tire, 13 x 5.5 x 9.5 in (outside diameter x width x inside diameter), for Crown electric lift trucks. It presses onto the wheel band with a steel mounting ring and runs with the low rolling resistance, non-marking contact, and long wear that make poly the standard tire for clean indoor electric-truck work. Confirm the tread pattern and compound for your floor before ordering.

Thombert Press-On Tire 13 x 5.5 x 9.5 for Crown – 10326-B2

Built in Dyalon B, one of Thombert's polyurethane load compounds, this press-on tire measures 13 inches in outside diameter with a 5.5 inch tread width and a 9.5 inch inside mounting diameter. The polyurethane tread is bonded to a steel band that presses onto the wheel under a hydraulic interference fit, and it is supplied as the tire itself rather than a complete tire-and-hub unit. Dyalon B carries the rolling load of an electric lift truck while resisting the cuts and chunking that shorten the life of a softer compound on a hard floor.

This size is documented against Thombert's OEM cross-reference table for Crown electric lift trucks. The 9.5 inch inside mounting diameter governs whether the tire seats, so match it to the wheel band the tire presses onto before fitting; an inside diameter that does not match the band will not hold the tire under load. The smooth tread spreads weight evenly across the 5.5 inch width for stable footing through a full shift.

SKU 10326-B2
Product ID 11077
Category , ,
Brand
Weight 25.78 lbs
Dimensions 13" L × 5.5" W × 13" H
Thombert Press-On Tire 13 x 5.5 x 9.5 for Crown – 10326-B2
Specifications
Part Type Press-On Tire
Manufacturer Thombert
Compound Dyalon B polyurethane
Outside Diameter 13 in
Width 5.5 in
Bore 9.5 in
Configuration Wheel only, no bearings
Sold As Each
Weight (lbs) 25.78
Length (in) 13.00
Width (in) 5.50
Height (in) 13.0
Product measurements are for shipping calculations only, and may vary. For questions about product sizes and shipping information, contact customer service.

These are the identifiers for this product. The SKU is the part number we use at Forklifts Etc. when you order. Below that you’ll also see the product ID, the OEM number when we have it, and cross-reference part numbers other manufacturers use for the same item.

SKU Number 10326-B2
Product ID 11077
Short Link https://forkliftsetc.net/?p=11077
Cross-Reference Part Numbers
Part Number
121501
H46998-501
10326-B2

Related Items: