$204.70
Every attachment function on a Crown lift truck begins with the valve spool selecting a port, and this one shifts within the bore to start, stop, and reverse tilt, clamp, or sideshift. Its machined lands seal mechanically against the bore wall on each stroke, metering flow at the tight clearance a hydraulic valve depends on. Weight runs about 0.30 pound.
Inside a Crown lift truck's attachment valve, this spool is the moving element that directs hydraulic oil to the port the operator selects, shifting within the valve bore to start, stop, and reverse a function such as tilt, clamp, or sideshift. Its machined lands seal against the bore wall on each stroke, metering flow with the tight clearance a hydraulic valve depends on. It weighs about 0.30 pound, in line with a compact directional-valve spool.
Because the seal is mechanical rather than a gasket, a scored or worn spool lets oil bypass internally, and the attachment starts to drift or respond sluggishly under load. A fresh spool restores the original clearance and control response. Match the replacement to the valve body and bore it runs in, since land spacing and diameter are cut for one specific valve.
| SKU | CA679846 |
|---|---|
| Product ID | 11106 |
| Category | Attachments |
| Brand | Crown |
| Weight | 0.3 lbs |
| Dimensions | 1" L × 1" W × 1" H |
| Type | Spool Assembly |
|---|---|
| Equipment | Crown lift trucks |
| Weight (lbs) | 0.30 |
These are the identifiers for this product. The SKU is the part number we use at Forklifts Etc. when you order. Below that you’ll also see the product ID, the OEM number when we have it, and cross-reference part numbers other manufacturers use for the same item.
| SKU Number | CA679846 |
|---|---|
| Product ID | 11106 |
| Short Link | https://forkliftsetc.net/?p=11106 |
| Part Number |
|---|
| CA679846 |
| CAC679846 |
