$199.00
Thombert press-on tire molded in green non-marking Dyalon A polyurethane on a bonded steel ring, running a 10 inch outside diameter and 4 inches wide over a 6.25 inch inside band. The non-marking compound leaves no scuff on finished warehouse floors, and Dyalon A is Thombert's general heavy-production grade balancing load capacity against wear life. Documented fitment covers BT and Prime Mover electric pallet and walkie equipment.
Thombert molds this press-on tire in green non-marking Dyalon A polyurethane on a bonded steel ring, a 10 inch outside diameter running 4 inches wide over a 6.25 inch inside band. The green non-marking compound leaves no scuff on finished warehouse floors, which is why it is specified where floor appearance matters. Dyalon A is Thombert's general heavy-production grade, balancing load capacity against wear life on a driven or loaded wheel.
Documented fitment covers BT and Prime Mover electric pallet and walkie equipment built around a 6.25 inch wheel band. Polyurethane pressed onto steel outlasts rubber through the constant starting, stopping, and turning of pallet handling, and the non-marking formula holds that wear life without trading away clean floors.
The 6.25 inch inside diameter governs the press fit, so match that band dimension to the wheel it seats on before pressing, since the tire only holds when the bore and wheel band agree. Forklifts Etc. carries this Thombert non-marking tire as a direct polyurethane replacement at the same 10 by 4 by 6.25 dimensions.
| SKU | 10070-AO |
|---|---|
| Product ID | 11262 |
| OEM Number | 10070-AO |
| Category | Press-On Poly, Tires, Tires & Wheels |
| Brand | Crown |
| Weight | 15 lbs |
| Dimensions | 1" L × 4" W × 1" H |
| Part Type | Press-On Tire |
|---|---|
| Manufacturer | Thombert |
| Compound | Dyalon A polyurethane |
| Outside Diameter | 10 in |
| Width | 4 in |
| Bore | 6.25 in |
| Configuration | Wheel only, no bearings |
| Sold As | Each |
| Weight (lbs) | 15.00 |
| Length (in) | 10.00 |
| Width (in) | 4.00 |
| Height (in) | 10.0 |
These are the identifiers for this product. The SKU is the part number we use at Forklifts Etc. when you order. Below that you’ll also see the product ID, the OEM number when we have it, and cross-reference part numbers other manufacturers use for the same item.
| SKU Number | 10070-AO |
|---|---|
| Product ID | 11262 |
| Short Link | https://forkliftsetc.net/?p=11262 |
| OEM Number | 10070-AO |
| Part Number |
|---|
| 304748-000 |
| 10070-AO |
| 10070AO |
| TH10070-AO |
| TH10070AO |
