Thombert Press-On Tire and Hub Assembly 13 x 5.5 x 8 – 10362 AO

Thombert Press-On Tire and Hub Assembly 13 x 5.5 x 8 – 10362 AO

PID: 11299

$280.65

Press-on polyurethane tire pre-pressed on a hub for Crown electric lift trucks, supplied as a complete tire-and-hub assembly in 13 x 5.5 x 8 in tire size. It installs as a unit on an exchange basis, so there is no separate tire press required. The polyurethane tread gives low rolling resistance, non-marking contact, and long wear on clean indoor floors.

Thombert Press-On Tire and Hub Assembly 13 x 5.5 x 8 – 10362 AO

The Dyalon A polyurethane tire arrives already pressed onto its hub as one complete unit, sized 13 inches in outside diameter, 5.5 inches wide, on an 8 inch bore. Thombert builds it as a tire-and-hub assembly, so the worn unit comes off and this one goes on without pressing a bare tire onto a reused hub, which is the practical advantage of buying the tire and hub together.

Dyalon A is Thombert's load-rated polyurethane, giving the 5.5 inch tread the firmness to carry a loaded carriage and the wear life to hold up on warehouse concrete. This size is documented to fit Clark, Crown, Raymond, and Yale electric lift trucks, covering a wide span of electric truck models with one assembly.

Match the 8 inch bore and the hub's mounting arrangement to the axle it installs on, since the assembly seats on that shaft and its bore governs the fit. Confirming the bore and hub against the part coming off is the quick check that keeps the swap a straight replacement.

SKU 10362 AO
Product ID 11299
Category , ,
Brand
Weight 28 lbs
Dimensions 13" L × 5.5" W × 13" H
Thombert Press-On Tire and Hub Assembly 13 x 5.5 x 8 – 10362 AO
Specifications
Part Type Press-On Tire
Manufacturer Thombert
Compound Dyalon A polyurethane
Outside Diameter 13 in
Width 5.5 in
Bore 8 in
Configuration Wheel only, no bearings
Sold As Each
Weight (lbs) 28.00
Length (in) 13.00
Width (in) 5.50
Height (in) 13.0
Product measurements are for shipping calculations only, and may vary. For questions about product sizes and shipping information, contact customer service.

These are the identifiers for this product. The SKU is the part number we use at Forklifts Etc. when you order. Below that you’ll also see the product ID, the OEM number when we have it, and cross-reference part numbers other manufacturers use for the same item.

SKU Number 10362 AO
Product ID 11299
Short Link https://forkliftsetc.net/?p=11299
Cross-Reference Part Numbers
Part Number
079266
2334092
2794307
319266
501776932
632-133
10362-AO

Related Items: