$135.30
Press-on polyurethane forklift tire, 10 x 5 x 6.5 in (outside diameter x width x inside diameter), for Crown electric lift trucks. It presses onto the wheel band with a steel mounting ring and runs with the low rolling resistance, non-marking contact, and long wear that make poly the standard tire for clean indoor electric-truck work. Confirm the tread pattern and compound for your floor before ordering.
Thombert builds this polyurethane press-on tire to a 10 inch outside diameter, 5 inches wide, on a 6.5 inch mounting bore that sets the interference fit onto the wheel. The polyurethane tread is bonded to a steel press-on band, a construction that carries heavy static and rolling loads while resisting the cuts and chunking that retire a softer tire, holding its shape through the start, stop, and turning cycles of daily electric lift truck work.
The smooth tread runs clean on finished indoor floors, and at 18 pounds the tire is sized for a compact truck or a load position. It seats by hydraulic press, driving the band onto the wheel under interference so the two turn as one with no fasteners. This is one of Thombert's widest fitting press-on sizes, documented to fit Allis Chalmers, BT and Prime Mover, Clark, Crown, Hyster, Linde and Baker, Raymond, Toyota, Unicarriers, and Yale lift trucks.
Match the mounting bore to the wheel diameter before pressing the tire on, since a press-on tire holds only by interference and will not stay seated on a wheel cut to a different size. Forklifts Etc. carries this Thombert tire as a direct replacement for the worn press-on it takes off.
| SKU | 10120-SUP |
|---|---|
| Product ID | 11525 |
| Category | Press-On Poly, Tires, Tires & Wheels |
| Brand | Crown |
| Weight | 17.2 lbs |
| Dimensions | 1" L × 5" W × 1" H |
| Part Type | Press-On Tire |
|---|---|
| Manufacturer | Thombert |
| Construction | Polyurethane tread |
| Outside Diameter | 10 in |
| Width | 5 in |
| Bore | 6.5 in |
| Sold As | Each |
| Weight (lbs) | 17.20 |
| Length (in) | 10.00 |
| Width (in) | 5.00 |
| Height (in) | 10.0 |
These are the identifiers for this product. The SKU is the part number we use at Forklifts Etc. when you order. Below that you’ll also see the product ID, the OEM number when we have it, and cross-reference part numbers other manufacturers use for the same item.
| SKU Number | 10120-SUP |
|---|---|
| Product ID | 11525 |
| Short Link | https://forkliftsetc.net/?p=11525 |
| Part Number |
|---|
| 00590-46881-71 |
| 139191 |
| 2309954 |
| 2778705 |
| 3021924 |
| 3022554 |
| 307922-000 |
| 310012 |
| 312063 |
| 338603 |
| 40265-00 |
| 502036002 |
| 504919500 |
| 504919501 |
| 632-090 |
| 708398 |
| 74818436 |
| 991012 |
| A13076-008 |
| 10120-SUP |
