Thombert Press-On Tire and Hub Assembly 13 x 5.5 x 9.5 – 10326 AOP

Thombert Press-On Tire and Hub Assembly 13 x 5.5 x 9.5 – 10326 AOP

PID: 11665

$190.99

Press-on polyurethane tire pre-pressed on a hub for Crown electric lift trucks, supplied as a complete tire-and-hub assembly in 13 x 5.5 x 9.5 in tire size. It installs as a unit on an exchange basis, so there is no separate tire press required. The polyurethane tread gives low rolling resistance, non-marking contact, and long wear on clean indoor floors.

Thombert Press-On Tire and Hub Assembly 13 x 5.5 x 9.5 – 10326 AOP

Thombert supplies this as a complete tire-and-hub assembly, a Dyalon A polyurethane tire already pressed onto its hub and sized at 13 inches in outside diameter, 5.5 inches wide, with a 9.5 inch bore. Because the tire arrives mounted on the hub, the swap is a bolt-on rather than a press job, with no need to press a bare tire onto a wheel on site. Dyalon A is Thombert's polyurethane compound, chosen for the abrasion resistance and load-carrying strength a solid tire needs under the weight of a lift truck.

At roughly 65 pounds, the assembly is a heavier unit sized for a mid to heavy-capacity electric truck, and Thombert documents fitment on Crown lift trucks. It is furnished on an exchange basis, with the worn hub returned against the replacement.

The 9.5 inch bore is the figure that sets how the hub mounts, so match it and the hub's mounting pattern to the truck before installation, since a hub of the wrong bore will not seat correctly on the axle.

SKU 10326 AOP
Product ID 11665
Category , ,
Brand
Weight 25.78 lbs
Dimensions 13" L × 5.5" W × 13" H
Thombert Press-On Tire and Hub Assembly 13 x 5.5 x 9.5 – 10326 AOP
Specifications
Part Type Press-On Tire
Manufacturer Thombert
Compound Dyalon A polyurethane
Outside Diameter 13 in
Width 5.5 in
Bore 9.5 in
Sold As Each
Weight (lbs) 25.78
Length (in) 13.00
Width (in) 5.50
Height (in) 13.0
Product measurements are for shipping calculations only, and may vary. For questions about product sizes and shipping information, contact customer service.

These are the identifiers for this product. The SKU is the part number we use at Forklifts Etc. when you order. Below that you’ll also see the product ID, the OEM number when we have it, and cross-reference part numbers other manufacturers use for the same item.

SKU Number 10326 AOP
Product ID 11665
Short Link https://forkliftsetc.net/?p=11665
Cross-Reference Part Numbers
Part Number
121501
H46998-501
10326-AOP

Related Items: