$432.50
Guiding and supporting a hydraulic hose as it travels over the mast, this Raymond hose pulley lets the hose follow the carriage up and down without kinking, chafing, or pulling. Its grooved sheave routes the hose around the change in direction at the top of the mast stage; when the pulley seizes or wears a flat, the hose bends sharply and fails early, so a fresh one protects it.
Raymond hose pulley that guides and supports a hydraulic hose as it travels over the mast, letting the hose follow the carriage up and down without kinking, chafing, or pulling as the forks raise and lower. The grooved sheave routes the hose around the change in direction at the top of the mast stage, taking the bending that would otherwise fatigue and split the hose.
A hose pulley that seizes, wears a flat, or loses its groove stops guiding the hose cleanly, and the hose then rubs or bends sharply and fails early. Replacing the pulley protects the hydraulic hose and keeps the mast's hose routing running smoothly through its full travel. Match the pulley's bore, outside diameter, and groove width to the original so it turns freely on its shaft and cradles the hose it carries.
| SKU | RA223-001-569/J61 |
|---|---|
| Product ID | 11766 |
| Category | Forks, Pulleys & Sheaves, Upright |
| Brand | Raymond |
| Weight | 2 lbs |
| Dimensions | 1" L × 1" W × 1" H |
| Type | Pulley, Hose |
|---|---|
| Equipment | Raymond lift trucks |
| Weight (lbs) | 20.00 |
These are the identifiers for this product. The SKU is the part number we use at Forklifts Etc. when you order. Below that you’ll also see the product ID, the OEM number when we have it, and cross-reference part numbers other manufacturers use for the same item.
| SKU Number | RA223-001-569/J61 |
|---|---|
| Product ID | 11766 |
| Short Link | https://forkliftsetc.net/?p=11766 |
| Part Number |
|---|
| RA223-001-569/J61 |
