$108.82
Formulated to stay fluid and pump freely in cold conditions, this low-temperature anti-wear hydraulic oil lets the pump draw immediately on a cold startup, so lift, tilt, and steering respond without the lag a stiff fluid causes. The anti-wear additive protects the pump, valves, and cylinders under working pressure. Supplied in a one gallon jug, suited to Crown lift trucks and other electric material handling equipment in cold-storage duty.
Low-temperature anti-wear hydraulic oil in a light viscosity grade, formulated to stay fluid and pump freely in cold conditions where a heavier oil would thicken and starve the system on startup. The low viscosity lets the pump draw oil immediately in a cold warehouse or a refrigerated environment, so lift, tilt, and steering respond without the lag a cold, stiff fluid causes.
The anti-wear additive package protects the pump, valves, and cylinders under working pressure, guarding the close-tolerance surfaces that carry the hydraulic load through every lift cycle. It suits the hydraulic systems on Crown lift trucks and other electric material handling equipment run in cold-storage and low-temperature duty.
Supplied in a one gallon jug for top-off or a full fluid change. Match the viscosity grade the equipment's hydraulic system specifies, since running a grade the pump was not built for changes both flow and wear behavior.
| Type | Hydraulic Oil Low Temp Gal Jug |
|---|---|
| Equipment | Crown lift trucks |
| Weight (lbs) | 10.00 |
These are the identifiers for this product. The SKU is the part number we use at Forklifts Etc. when you order. Below that you’ll also see the product ID, the OEM number when we have it, and cross-reference part numbers other manufacturers use for the same item.
| SKU Number | AW15-1 |
|---|---|
| Product ID | 11774 |
| Short Link | https://forkliftsetc.net/?p=11774 |
| Part Number |
|---|
| TSA-INAN-222XAW15-1 |
