Thombert Press-On Tire 10.5 x 5 x 6.5 – 10230-B

Thombert Press-On Tire 10.5 x 5 x 6.5 – 10230-B

PID: 11800

$225.48

Press-on polyurethane forklift tire, 10.5 x 5 x 6.5 in (outside diameter x width x inside diameter), for Crown electric lift trucks. It presses onto the wheel band with a steel mounting ring and runs with the low rolling resistance, non-marking contact, and long wear that make poly the standard tire for clean indoor electric-truck work. Confirm the tread pattern and compound for your floor before ordering.

Thombert Press-On Tire 10.5 x 5 x 6.5 – 10230-B

Thombert manufactures this press-on forklift tire in a 10.5 inch outside diameter with a 5 inch tread width and a 6.5 inch inside mounting diameter, a polyurethane tread bonded to a steel band that presses onto the wheel under a hydraulic interference fit. The 6.5 inch mounting diameter is the dimension that governs the fit, since a press-on tire seats only when its inside diameter matches the wheel band it drives onto. Polyurethane gives the tire the load capacity and cut resistance an electric lift truck needs on a hard warehouse floor, wearing evenly rather than chunking the way a softer compound can under repeated cornering.

Documented against Thombert's OEM cross-reference table, this size fits BT/Prime Mover, Big Joe, Clark, Crown, Linde/Baker, MCFA, and Raymond lift trucks. The smooth tread carries the full contact patch across the 5 inch width for stable footing under load. Before pressing the tire on, match the 6.5 inch inside diameter to the wheel it mounts on, since a band that runs undersized or oversized will not seat the tire correctly. Forklifts Etc. supplies this Thombert press-on tire as a direct replacement for a worn unit.

SKU 10230-B
Product ID 11800
Category , ,
Brand
Weight 20.5 lbs
Dimensions 10.5" L × 5" W × 10.5" H
Thombert Press-On Tire 10.5 x 5 x 6.5 – 10230-B
Specifications
Part Type Press-On Tire
Manufacturer Thombert
Construction Polyurethane tread
Outside Diameter 10.5 in
Width 5 in
Bore 6.5 in
Sold As Each
Weight (lbs) 20.50
Length (in) 10.50
Width (in) 5.00
Height (in) 10.5
Product measurements are for shipping calculations only, and may vary. For questions about product sizes and shipping information, contact customer service.

These are the identifiers for this product. The SKU is the part number we use at Forklifts Etc. when you order. Below that you’ll also see the product ID, the OEM number when we have it, and cross-reference part numbers other manufacturers use for the same item.

SKU Number 10230-B
Product ID 11800
Short Link https://forkliftsetc.net/?p=11800
Cross-Reference Part Numbers
Part Number
1008930
1008931
1075065
1075066
1075067
127631
20262-01
25922
301738-000
303624-000
310020
632-095
632-101/BA
708043
708403
79114
79116
79163
887931
908000
908327
911144
XP20262-02X
10230-B

Related Items: