Thombert Dyalon A Press-On Tire 9 x 5 x 5.75 for Crown – 10018-AO

Dyalon A polyurethane forms this Thombert press-on tire, sized to a 9 inch outside diameter on a 5 inch width with a 5.75 inch inside diameter that presses onto the wheel. Dyalon A is Thombert's load-bearing polyurethane compound, giving the tire the load capacity and non-marking, cut-resistant tread a solid poly tire needs on a walkie or electric truck, bonded to a steel band that grips the wheel under a hydraulic press. The 9 inch diameter and 5 inch width set the footprint the equipment was built around, while the 5.75 inch inside diameter governs the press fit onto the wheel.

Thombert documents this tire to fit Crown equipment at this size, where it serves as a load wheel or drive tire on oversized-hub walkies. As a press-on tire it carries no bearings and presses directly onto the existing wheel with a hydraulic press.

Before installing, match the 5.75 inch inside diameter to the wheel it presses onto, since a press-on tire seats correctly only when the band and wheel diameter agree.