Thombert Press-On Tire 13.5 x 6 x 10.5 – 10376-SUP

Thombert Press-On Tire 13.5 x 6 x 10.5 – 10376-SUP

PID: 11851

$205.36

Press-on polyurethane forklift tire, 13.5 x 6 x 10.5 in (outside diameter x width x inside diameter), for Crown electric lift trucks. It presses onto the wheel band with a steel mounting ring and runs with the low rolling resistance, non-marking contact, and long wear that make poly the standard tire for clean indoor electric-truck work. Confirm the tread pattern and compound for your floor before ordering.

Thombert Press-On Tire 13.5 x 6 x 10.5 – 10376-SUP

Thombert builds this polyurethane press-on tire to a 13.5 inch outside diameter, 6 inches wide, on a 10.5 inch mounting bore that sets the interference fit onto the wheel. The polyurethane tread is bonded to a steel press-on band, a construction that carries heavy static and rolling loads while resisting the cuts and chunking that retire a softer tire, holding its shape through the start, stop, and turning cycles an electric lift truck runs through every shift.

The smooth tread runs clean on finished indoor floors, and at 24 pounds the tire is sized for a mid-range truck. It seats by hydraulic press, driving the bonded band onto the wheel under interference so the two turn as one piece with no fasteners to loosen. This Thombert tire is documented to fit Crown, MCFA, and Raymond lift trucks.

Match the mounting bore to the wheel diameter before pressing the tire on, since a press-on tire holds only by interference and will not stay seated on a wheel cut to a different size. Forklifts Etc. carries this tire as a direct replacement for the worn press-on it takes off.

SKU 10376-SUP
Product ID 11851
Category , ,
Brand
Weight 29.16 lbs
Dimensions 13.5" L × 6" W × 13.5" H
Thombert Press-On Tire 13.5 x 6 x 10.5 – 10376-SUP
Specifications
Part Type Press-On Tire
Manufacturer Thombert
Construction Polyurethane tread
Outside Diameter 13.5 in
Width 6 in
Bore 10.5 in
Sold As Each
Weight (lbs) 29.16
Length (in) 13.50
Width (in) 6.00
Height (in) 13.5
Product measurements are for shipping calculations only, and may vary. For questions about product sizes and shipping information, contact customer service.

These are the identifiers for this product. The SKU is the part number we use at Forklifts Etc. when you order. Below that you’ll also see the product ID, the OEM number when we have it, and cross-reference part numbers other manufacturers use for the same item.

SKU Number 10376-SUP
Product ID 11851
Short Link https://forkliftsetc.net/?p=11851
Cross-Reference Part Numbers
Part Number
1050144
1053773
310037
314318-000
632-131
10376-SUP

Related Items: