Thombert Press-On Poly Tire 12 x 4.5 x 8 – 10320 B

Thombert Press-On Poly Tire 12 x 4.5 x 8 – 10320 B

$140.90

Press-on polyurethane forklift tire, 12 x 4.5 x 8 in (outside diameter x width x inside diameter), for Crown and Raymond electric lift trucks. It presses onto the wheel band with a steel mounting ring and runs with the low rolling resistance, non-marking contact, and long wear that make poly the standard tire for clean indoor electric-truck work. Confirm the tread pattern and compound for your floor before ordering.

Thombert Press-On Poly Tire 12 x 4.5 x 8 – 10320 B

Thombert builds this press-on tire with a solid polyurethane tread on a steel band, sized at 12 inches in outside diameter, 4.5 inches wide, with an 8 inch inside mounting diameter. The polyurethane carries load and resists abrasion across a hard indoor duty cycle, holding its shape under the sustained weight an electric lift truck puts through its wheels without the flat risk of a pneumatic. At roughly 20 pounds, the tire is sized for a mid-capacity truck, and its 8 inch inside diameter is the figure that governs the press fit.

Thombert documents fitment across Crown, Hyster, Raymond, Toyota, Unicarriers, and Yale lift trucks, so a single part covers a mixed fleet running several of those makes. The smooth tread suits the flat, finished floors these electric trucks work on.

Seat the tire with a hydraulic press, since the interference fit between the band and the wheel is what keeps it in place under load. Match the 8 inch inside diameter to the wheel it presses onto before installation, because a press-on tire will not seat on a band of the wrong bore.

SKU 10320 B
Product ID 11916
Category , ,
Brand ,
Weight 21.8 lbs
Dimensions 12" L × 4.5" W × 12" H
Thombert Press-On Poly Tire 12 x 4.5 x 8 – 10320 B
Specifications
Part Type Press-On Tire
Manufacturer Thombert
Construction Polyurethane tread
Outside Diameter 12 in
Width 4.5 in
Bore 8 in
Sold As Each
Weight (lbs) 21.80
Length (in) 12.00
Width (in) 4.50
Height (in) 12.0
Product measurements are for shipping calculations only, and may vary. For questions about product sizes and shipping information, contact customer service.

These are the identifiers for this product. The SKU is the part number we use at Forklifts Etc. when you order. Below that you’ll also see the product ID, the OEM number when we have it, and cross-reference part numbers other manufacturers use for the same item.

SKU Number 10320 B
Product ID 11916
Short Link https://forkliftsetc.net/?p=11916
Cross-Reference Part Numbers
Part Number
00590-47448-71
1060703
13076-033
3022556
310025
3120638
524149477
524149478
A13076-015
10320B

Related Items: