Thombert Press-On Poly Tire 10.5 x 4 x 8 for Crown – 10185-AO

Thombert Press-On Poly Tire 10.5 x 4 x 8 for Crown – 10185-AO

PID: 11920

$140.45

Press-on polyurethane forklift tire, 10.5 x 4 x 8 in (outside diameter x width x inside diameter), for Crown electric lift trucks. It presses onto the wheel band with a steel mounting ring and runs with the low rolling resistance, non-marking contact, and long wear that make poly the standard tire for clean indoor electric-truck work. Confirm the tread pattern and compound for your floor before ordering.

Thombert Press-On Poly Tire 10.5 x 4 x 8 for Crown – 10185-AO

Thombert presses a Dyalon A polyurethane tread onto a steel band to build this press-on tire, sized at 10.5 inches in outside diameter, 4 inches wide, with an 8 inch inside mounting diameter. Dyalon A is Thombert's polyurethane compound, chosen for the abrasion resistance and load-carrying strength a solid tire needs across a working shift. At roughly 14 pounds, it is a lighter-duty size that still carries its load without the flat risk of a pneumatic, and the 8 inch inside diameter is the figure that governs the interference fit.

Thombert documents fitment on Crown electric lift trucks, so it drops onto that make as a cataloged size. The smooth tread and solid polyurethane build suit the flat indoor floors these trucks run on.

Seat the tire with a hydraulic press, since the interference fit between the band and the wheel is what holds it in service. Match the 8 inch inside diameter to the wheel it presses onto before installation, because a press-on tire cut to one bore will not seat on a band of another.

SKU 10185-AO
Product ID 11920
Category , ,
Brand
Weight 14.7 lbs
Dimensions 10.5" L × 4" W × 10.5" H
Thombert Press-On Poly Tire 10.5 x 4 x 8 for Crown – 10185-AO
Specifications
Part Type Press-On Tire
Manufacturer Thombert
Compound Dyalon A polyurethane
Outside Diameter 10.5 in
Width 4 in
Bore 8 in
Configuration Wheel only, no bearings
Sold As Each
Weight (lbs) 14.70
Length (in) 10.50
Width (in) 4.00
Height (in) 10.5
Product measurements are for shipping calculations only, and may vary. For questions about product sizes and shipping information, contact customer service.

These are the identifiers for this product. The SKU is the part number we use at Forklifts Etc. when you order. Below that you’ll also see the product ID, the OEM number when we have it, and cross-reference part numbers other manufacturers use for the same item.

SKU Number 10185-AO
Product ID 11920
Short Link https://forkliftsetc.net/?p=11920
Cross-Reference Part Numbers
Part Number
105088
10185-AO

Related Items: