$16.38
Raymond built this sleeve bearing to give a smooth, low-friction surface for a shaft or pin to turn against at a linkage or pivot in the lift mechanism, taking the wear itself so the mating parts do not. Running as a plain bearing rather than a rolling-element one, it carries load across the full bearing surface and suits the slow, high-load pivoting motion of lift linkage.
Raymond built this sleeve bearing to give a smooth, low-friction surface for a shaft or pin to turn against at a linkage or pivot in the lift mechanism, taking the wear itself so the mating parts do not. Running as a plain bearing rather than a rolling-element one, it carries load across the full bearing surface and suits the slow, high-load pivoting motion of lift linkage.
A sleeve bearing worn oversize introduces play into the linkage, which shows up as slop and uneven movement in the lift. Match the inside and outside diameters and the length to the bearing being replaced, since a sleeve bearing sizes to both its bore and its shaft.
| SKU | RA1025349/010 |
|---|---|
| Product ID | 12095 |
| Category | Lift Linkage, Tires & Wheels |
| Brand | Raymond |
| Weight | 0.2 lbs |
| Dimensions | 1.15" L × 1.2" W × 1.6" H |
| Type | Bearing, Sleeve |
|---|---|
| Equipment | Raymond lift trucks |
| Weight (lbs) | 0.20 |
| Length (in) | 1.15 |
| Width (in) | 1.20 |
| Height (in) | 1.6 |
These are the identifiers for this product. The SKU is the part number we use at Forklifts Etc. when you order. Below that you’ll also see the product ID, the OEM number when we have it, and cross-reference part numbers other manufacturers use for the same item.
| SKU Number | RA1025349/010 |
|---|---|
| Product ID | 12095 |
| Short Link | https://forkliftsetc.net/?p=12095 |
| Part Number |
|---|
| RA1025349/010 |
