Thombert Load Wheel Assembly 4 x 2.5 x 2.047 – SU-2283AOA

This Thombert load wheel assembly runs the 4 inch load wheel position, measuring 4 inches in outside diameter and 2.5 inches wide on a 2.047 inch bore. The tread is Dyalon A, Thombert's polyurethane wheel compound, which gives the high load capacity and abrasion resistance a load wheel needs while resisting the flat-spotting and chunking that force an early replacement.

Bearings are already pressed into the hub, built on the 8505 series bearing in a greasable configuration, so the assembly bolts on complete and the bearing can be serviced with fresh grease rather than discarded with the wheel. That greasable setup extends the interval between full wheel replacements on a truck that sees continuous duty.

Thombert documents fitment across a broad group of lift trucks, including Crown, Hyster, Raymond, Toyota, Yale, Linde, Baker, BT, Prime Mover, and MCFA, reflecting how widely this load wheel size is used across electric and reach-truck platforms. Match the 2.047 inch bore to the axle the wheel presses onto, since the press fit depends on the bore and shaft diameters agreeing.