Thombert Press-On Tire 13 x 5.5 x 9.5 for Crown – 10326 AO

Thombert Press-On Tire 13 x 5.5 x 9.5 for Crown – 10326 AO

PID: 13952

$190.99

This Thombert press-on tire is molded from Dyalon A polyurethane to carry the daily load cycles of Crown electric lift trucks, a compound chosen for load rating and abrasion resistance on hard floors without heat buildup. Sized to a 13 inch outside diameter, 5.5 inches wide with a 9.5 inch inside diameter, it drops in as a direct service part supplied on its band without bearings.

Thombert Press-On Tire 13 x 5.5 x 9.5 for Crown – 10326 AO

Thombert Dyalon A polyurethane carries this press-on tire through the daily load cycles of a Crown electric lift truck, molded to a 13 inch outside diameter, 5.5 inches wide, with a 9.5 inch inside diameter that sets the press fit onto the drive band. Dyalon A is chosen for the load rating and abrasion resistance that let a solid press-on tire carry sustained truck weight on hard floors without the heat buildup that breaks down weaker compounds.

Thombert's OEM cross-reference documents this tire fitting Crown lift trucks, so it drops in as a direct service part for the Crown line it was cataloged against. It is supplied as the tire on its band without bearings, so the wheel bearings already on the truck are reused at installation.

The 9.5 inch inside diameter is the dimension to match against the band on the truck. A press-on tire seats only by interference fit, and one cut for a 9.5 inch band will not seat on a band of another size, so measure before pressing the new tire on.

SKU 10326 AO
Product ID 13952
Category , ,
Weight 25.78 lbs
Dimensions 13" L × 5.5" W × 13" H
Thombert Press-On Tire 13 x 5.5 x 9.5 for Crown – 10326 AO
Specifications
Part Type Press-On Tire
Manufacturer Thombert
Compound Dyalon A polyurethane
Outside Diameter 13 in
Width 5.5 in
Bore 9.5 in
Configuration Wheel only, no bearings
Sold As Each
Weight (lbs) 25.78
Length (in) 13.00
Width (in) 5.50
Height (in) 13.0
Product measurements are for shipping calculations only, and may vary. For questions about product sizes and shipping information, contact customer service.

These are the identifiers for this product. The SKU is the part number we use at Forklifts Etc. when you order. Below that you’ll also see the product ID, the OEM number when we have it, and cross-reference part numbers other manufacturers use for the same item.

SKU Number 10326 AO
Product ID 13952
Short Link https://forkliftsetc.net/?p=13952
Cross-Reference Part Numbers
Part Number
121501
H46998-501
10326AO

Related Items: