Thombert Load Wheel Assembly 5 x 4.12 x 2.44 for Crown – ST-2267G AOA

Thombert builds this Dyalon A load wheel assembly to a 5 inch outside diameter, a 4.12 inch width, and a 2.440 inch bore, and it arrives complete with its bearings pressed into the hub. Buying the assembly means the wheel and bearings install as one unit, so there is no separate press-fitting step and no risk of seating a bearing out of square. Dyalon A is Thombert's polyurethane compound, chosen for the load capacity and abrasion resistance a load wheel needs to hold its shape through a heavy duty cycle.

The assembly runs on a 6305-series bearing sized to the 2.440 inch bore, and the greasable bearing lets a technician re-lubricate the seat on a maintenance schedule rather than replace the wheel when the grease breaks down. String guards protect the bearing area from twine and floor debris. Thombert documents fitment to Crown lift trucks in its equipment cross-reference, making this a direct replacement on those machines.

Match the 2.440 inch bore to your axle diameter before installation, since a press-fit assembly will not seat square on a shaft cut to the wrong size. Within the Forklifts Etc. catalog this is a direct replacement for the worn Crown load wheel it comes off.