Thombert Load Wheel 6 x 2.75 x 3.149 – ST-2215

Thombert manufactures this polyurethane load wheel to a 6 inch outside diameter, 2.75 inches wide, on a 3.149 inch bore, the three measurements that separate it from the other wheels in its size family. The bore is the fit-critical dimension, since it governs how the wheel presses onto the axle and whether it seats square under a working load. Polyurethane gives a load wheel the load rating and abrasion resistance that a steer or load position demands, running quieter than a steel wheel and resisting the chunking that shortens the life of a softer rubber tread.

The wheel is built around a 6307 bearing and carries a 0.83 inch bore depth that sets how the bearing beds into the hub. On the equipment side, this Thombert wheel is documented to fit Clark, Crown, and Raymond lift trucks, so a shop servicing any of those brands can source it as a dimensional replacement for the worn wheel it takes off.

Match the bore to the axle before pressing the wheel on, since a press-fit wheel will not seat on a shaft cut to a different diameter, and check that the 6307 bearing series beds correctly into the existing hub. Forklifts Etc. stocks this Thombert load wheel for daily material handling duty.