Thombert Load Wheel 5 x 4.12 x 2.44 for Crown – SU-2267-306

Thombert Load Wheel 5 x 4.12 x 2.44 for Crown – SU-2267-306

PID: 14549

$51.20

This polyurethane load wheel measures 5.00 inches outside diameter, 4.12 inches wide, with a 2.440 inch bore, carrying a -306 compound variant designation. Compound formulation sets a load wheel's carrying capacity as much as its dimensions do, which is why variants carry their own numbers.

Thombert Load Wheel 5 x 4.12 x 2.44 for Crown – SU-2267-306

Thombert makes this polyurethane load wheel at 5 inches in outside diameter and 4.12 inches wide on a 2.44 inch bore, built in a specific compound variant of the wide-tread load wheel used on stand-up and reach trucks. The polyurethane tread carries heavy static and rolling loads with strong abrasion resistance, rolling quieter and easier on warehouse floors than a steel or cast wheel while resisting the chunking and flat-spotting that shortens a softer tread. The hub is bored for the 6305 bearing series.

Thombert's cross-reference table documents this wheel fitting Crown lift trucks, including the reach-truck load stations that run this 5 by 4.12 size. The bore is the fit-critical dimension on a press-fit wheel: measure the bearing seat or axle the wheel mounts on and match it to the 2.44 inch bore, and confirm the 6305 bearing size, since a wheel bored for the wrong shaft will not seat and hold under load.

SKU SU-2267-306
Product ID 14549
Category ,
Brand
Weight 11.2 lbs
Dimensions 5" L × 4.12" W × 5" H
Thombert Load Wheel 5 x 4.12 x 2.44 for Crown – SU-2267-306
Specifications
Part Type Load Wheel
Manufacturer Thombert
Construction Polyurethane tread
Outside Diameter 5 in
Width 4.12 in
Bore 2.44 in
Bore Depth 0.826 in
Bearing 6305
Bearing Type Greasable
Sold As Each
Weight (lbs) 11.20
Length (in) 5.00
Width (in) 4.12
Height (in) 5.0
Product measurements are for shipping calculations only, and may vary. For questions about product sizes and shipping information, contact customer service.

These are the identifiers for this product. The SKU is the part number we use at Forklifts Etc. when you order. Below that you’ll also see the product ID, the OEM number when we have it, and cross-reference part numbers other manufacturers use for the same item.

SKU Number SU-2267-306
Product ID 14549
Short Link https://forkliftsetc.net/?p=14549
Cross-Reference Part Numbers
Part Number
115033
6305
CR327
CR9153
S9153
S9157
SU-2267-306

Related Items: