Thombert Load Wheel Assembly 3.25 x 6.5 x 2.047 – ST-2261 AOA

Thombert delivers this load wheel as a complete assembly, its Dyalon A polyurethane tread pressed onto a hub carrying 6205 bearings and the spacer that sets them at the correct width. The wheel measures 3.25 inches in outside diameter and 6.5 inches wide on a 2.047 inch bore, a wide load roller for the load stations it was cataloged to. Dyalon A polyurethane gives high load capacity and abrasion resistance while rolling easier and quieter than steel, and the pressed-in bearings arrive greasable, so the assembly can be relubricated in service rather than replaced at the first sign of wear.

Because it arrives assembled with bearings and spacer in place, it installs as one unit with no bench press work. Thombert's cross-reference table documents this assembly fitting Clark, Crown, MCFA, and Raymond material handling equipment. Confirm the axle diameter before installation: the 2.047 inch bore and 6205 bearing seat must match the shaft the assembly rides on, since a press-fit load wheel will not seat correctly on the wrong axle.