Thombert Load Wheel Assembly 3.25 x 6.5 x 2.047 – ML-2261AOA

Thombert turns this load wheel assembly from its Dyalon A polyurethane to a 3.25 inch outside diameter across a 6.5 inch face, running on a 2.047 inch bore, and it comes with the 6205 bearings already pressed into the hub. Dyalon A is Thombert's heavy-load urethane, specified on a load wheel because it carries a concentrated load on a small diameter without flat-spotting and holds its shape through a hard duty cycle. With the bearings installed, the assembly bolts in as a unit instead of needing a separate wheel, press, and bearing set.

The 6205 bearings are greasable, so periodic lubrication keeps the assembly turning freely and extends its life under load. Documented fitment covers Clark, Crown, MCFA, and Raymond lift trucks, so a single assembly serves several brands across a mixed pallet and reach-truck fleet.

Bore is the fit-critical measurement on a press-on load wheel, so match the 2.047 inch bore to the axle the wheel rides before installing, since it will not seat true on a shaft it was not cut for. Forklifts Etc. supplies this Thombert assembly as a direct replacement for a worn load wheel.