Thombert Poly Load Wheel 3.25 x 6.5 x 2.047 – ST-2261

Thombert casts this polyurethane load wheel to a 3.25 inch outside diameter, a 6.50 inch width, and a 2.047 inch bore, a wide-tread profile that spreads a lift truck's load across a broader contact patch. The 2.047 inch bore sets the press fit onto the axle, and bore accuracy is what keeps the wheel seated square and running true under a loaded mast. Polyurethane gives the tread the load capacity and abrasion resistance to hold its shape through the repeated starts, stops, and turns of a warehouse shift.

The bore is sized to take a 6205-series bearing, a standard seat rather than a proprietary fit. Thombert documents fitment across Clark, Crown, MCFA, and Raymond lift trucks in its equipment cross-reference, which makes this wheel a broad replacement for a shop servicing more than one brand. As the tread wears thin or starts to flat-spot, traction and ride quality drop off, the signal that the wheel has reached the end of its service life.

Match the 2.047 inch bore to your axle diameter before pressing the wheel on, since a press-fit wheel will not seat correctly on a shaft cut to the wrong size. Forklifts Etc. lists this Thombert wheel as a direct dimensional replacement.