Thombert Poly Load Wheel 3.25 x 6.5 x 2.047 – SU-2261

Thombert casts this polyurethane load wheel at a 3.25 inch outside diameter and a 6.5 inch width on a 2.047 inch bore, a wide load wheel that spreads a heavy load across a long contact face. Polyurethane is the reason the wheel holds its shape under the slow, concentrated pressure a lift truck's load wheels carry; it resists the flat-spotting and chunking that break down a softer rubber tread parked under weight. The 2.047 inch bore is machined to the 6205 bearing series, so the hub accepts a common, widely stocked bearing.

This wheel fits Clark, Crown, MCFA, and Raymond lift trucks, a documented fitment set that makes it a useful stock item for a service operation running a mixed fleet. Load wheels sit at the load-bearing end of the truck and take the full weight through a small footprint, so they wear steadily and get replaced on a routine schedule rather than run to failure.

Match the 2.047 inch bore to the axle before installing, since a press-fit wheel seats only on the shaft it was sized for, and confirm the 6205 bearing seat so replacement bearings match the bore this hub carries.