Thombert Press-On Tire 10 x 4 x 6.5 – 10090 AO

Thombert Press-On Tire 10 x 4 x 6.5 – 10090 AO

PID: 14828

$163.72

Thombert Dyalon A polyurethane gives this press-on drive tire its load capacity and abrasion resistance across a 10 inch outside diameter, with the tread bonded to a steel mounting ring for a permanent interference fit. Dyalon A resists the cutting and chunking that end a softer tire's life on hard floors. Thombert's cross-reference documents fitment across Big Joe, Blue Giant, Hyster, Linde/Baker, and Unicarriers equipment.

Thombert Press-On Tire 10 x 4 x 6.5 – 10090 AO

Thombert Dyalon A polyurethane gives this press-on drive tire its load capacity and abrasion resistance across a 10 inch outside diameter, 4 inch width, and 6.5 inch inside diameter, with the tread bonded to a steel mounting ring for a permanent interference fit. At roughly 15 pounds, it is a compact drive tire sized for the smaller electric trucks and powered pallet equipment that run it. Dyalon A resists the cutting and chunking that end the life of a softer tire on hard floors and around dock plates.

Thombert's OEM cross-reference documents fitment across Big Joe, Blue Giant, Hyster, Linde/Baker, and Unicarriers equipment, which covers a range of walkie and rider pallet trucks and small lift lines. It is supplied as the tire on its bonded ring, so the truck's existing bearings are reused at installation.

Because the tire presses on by interference, the 6.5 inch inside diameter has to match the band it mounts to. Match the band diameter on the truck before pressing this tire into place, since a ring cut for one size will not seat on another.

SKU 10090 AO
Product ID 14828
OEM Number 10090-AO
Category , ,
Brand
Weight 14.5 lbs
Dimensions 1" L × 4" W × 1" H
Thombert Press-On Tire 10 x 4 x 6.5 – 10090 AO
Specifications
Part Type Press-On Tire
Manufacturer Thombert
Compound Dyalon A polyurethane
Outside Diameter 10 in
Width 4 in
Bore 6.5 in
Configuration Wheel only, no bearings
Sold As Each
Weight (lbs) 14.50
Length (in) 10.00
Width (in) 4.00
Height (in) 10.0
Product measurements are for shipping calculations only, and may vary. For questions about product sizes and shipping information, contact customer service.

These are the identifiers for this product. The SKU is the part number we use at Forklifts Etc. when you order. Below that you’ll also see the product ID, the OEM number when we have it, and cross-reference part numbers other manufacturers use for the same item.

SKU Number 10090 AO
Product ID 14828
Short Link https://forkliftsetc.net/?p=14828
OEM Number 10090-AO
Cross-Reference Part Numbers
Part Number
020-040
020-048
020-051
020-067
020-077
13076-030
2022571
3020223
3028200
3030223
3030828
43312-FS413
708397
79161
79162
908181
A13076-019
10090AO
TH10090-AO

Related Items: