$18.06
Protects main circuit wiring on electric lift trucks and other battery-powered material handling equipment, this 125 amp fuse uses the ANL bolt-down body style, fastening directly between two terminals for the higher current primary circuits carry. A calibrated element opens if draw exceeds its 125 amp rating, shielding the motor controller, wiring, and battery during a short or overload.
A 125 amp fuse in the ANL bolt-down body style protects main circuit wiring on electric lift trucks and other battery powered material handling equipment. Rather than plugging into a blade-style holder, an ANL fuse bolts directly between two terminals in the circuit, a mounting style chosen for the higher current these primary battery and motor circuits carry.
Sized at 3.03 inches long, 0.92 inches high, and 0.38 inches wide, it fits standard ANL fuse holders and blocks used throughout the industry at this amperage class. Inside, a calibrated fusible element opens the circuit if current draw exceeds the 125 amp rating, protecting the motor controller, wiring, and battery from damage during a short or sustained overload.
Because this fuse sits in a high-current path, it typically protects a primary circuit such as the main battery feed or drive motor line rather than a low-draw accessory circuit. Replacing a blown fuse with the correct 125 amp rating keeps the protected circuit within its designed current limit rather than leaving it unprotected or under-protected with a mismatched substitute.
