Thombert Press-On Tire and Hub Assembly 13 x 4.5 x 8 – 10350 AOP

Thombert Press-On Tire and Hub Assembly 13 x 4.5 x 8 – 10350 AOP

PID: 12096

$190.80

Press-on polyurethane tire pre-pressed on a hub for Crown electric lift trucks, supplied as a complete tire-and-hub assembly in 13 x 4.5 x 8 in tire size. It installs as a unit on an exchange basis, so there is no separate tire press required. The polyurethane tread gives low rolling resistance, non-marking contact, and long wear on clean indoor floors.

Thombert Press-On Tire and Hub Assembly 13 x 4.5 x 8 – 10350 AOP

The tire arrives already pressed onto its hub as one complete unit, a Thombert press-on tire and hub assembly molded in Dyalon A polyurethane at a 13 inch outside diameter with a 4.5 inch tread width on an 8 inch bore hub. Because the polyurethane tire is factory-pressed to the hub, the assembly bolts on in place of the worn unit without a separate press operation, which is why it is supplied on an exchange basis. Dyalon A gives the tread the load capacity and cut resistance an electric lift truck needs, wearing evenly rather than chunking under repeated cornering.

This size is documented against Thombert's OEM cross-reference table for Crown electric lift trucks. At 55 pounds the assembly reflects the combined mass of the tire and its hub. Match the 8 inch bore of the hub to the axle it mounts on, since the hub must seat squarely on the shaft to run true under load.

SKU 10350 AOP
Product ID 12096
Category , ,
Brand
Weight 22.5 lbs
Dimensions 13" L × 4.5" W × 13" H
Thombert Press-On Tire and Hub Assembly 13 x 4.5 x 8 – 10350 AOP
Specifications
Part Type Press-On Tire
Manufacturer Thombert
Compound Dyalon A polyurethane
Outside Diameter 13 in
Width 4.5 in
Bore 8 in
Sold As Each
Weight (lbs) 22.50
Length (in) 13.00
Width (in) 4.50
Height (in) 13.0
Product measurements are for shipping calculations only, and may vary. For questions about product sizes and shipping information, contact customer service.

These are the identifiers for this product. The SKU is the part number we use at Forklifts Etc. when you order. Below that you’ll also see the product ID, the OEM number when we have it, and cross-reference part numbers other manufacturers use for the same item.

SKU Number 10350 AOP
Product ID 12096
Short Link https://forkliftsetc.net/?p=12096
Cross-Reference Part Numbers
Part Number
079494
310204
10350-AOP

Related Items: