$102.07
Crown makes this pinion gear as the small drive gear that meshes with a larger gear to multiply torque and transfer it through the drivetrain, turning engagement into pulling force. A pinion runs under constant load, and worn, chipped, or pitted teeth show up as noise, backlash, or slipping where the gear no longer meshes cleanly. This replacement restores a full, correctly cut tooth profile.
Crown makes this pinion gear as the small drive gear that meshes with a larger gear to multiply torque and transfer it through the drivetrain, the compact toothed gear that turns engagement into pulling force. A pinion runs under constant load, and worn, chipped, or pitted teeth show up as noise, backlash, or slipping where the gear no longer meshes cleanly.
This replacement restores a full, correctly cut tooth profile to the mesh. As a Crown gear, it is machined to the tooth count, pitch, and bore of the original. Match the tooth count and bore to the pinion being replaced, since a gear that differs in either will not mesh or seat on its shaft.
| SKU | CR138792 |
|---|---|
| Product ID | 15061 |
| Category | Gears & Pinions, Transmission |
| Brand | Crown |
| Weight | 0.1 lbs |
| Dimensions | 1" L × 1" W × 1" H |
| Type | Gear,Pinion |
|---|---|
| Equipment | Crown lift trucks |
| Weight (lbs) | 0.10 |
These are the identifiers for this product. The SKU is the part number we use at Forklifts Etc. when you order. Below that you’ll also see the product ID, the OEM number when we have it, and cross-reference part numbers other manufacturers use for the same item.
| SKU Number | CR138792 |
|---|---|
| Product ID | 15061 |
| Short Link | https://forkliftsetc.net/?p=15061 |
| Part Number |
|---|
| CR138792 |
