$237.78
Transmits torque through a Raymond drivetrain by meshing with its mating gear, turning motor output into the wheel or component it drives. Cut to Raymond's original tooth profile and dimensions, it meshes with the surrounding gears without the backlash or noise a worn or chipped gear introduces. Teeth wear, pit, and chip under sustained load, showing up as noise, roughness, or lost drive. Sold as a single gear.
A gear transmits torque by meshing with its mating gear, and this Raymond gear turns motor output into the wheel or component motion it drives within the drivetrain. Cut to Raymond's original tooth profile and dimensions, it meshes with the gears around it without the backlash or noise a worn or mismatched gear introduces.
Gear teeth carry their load at the contact face, and under sustained duty they wear, pit, and eventually chip or break. A damaged gear shows up as noise, roughness, or lost drive, and a chipped tooth can quickly damage the gears it meshes with, so replacing it protects the rest of the set.
Sold as a single gear, it restores the original mesh and torque transfer to the assembly it belongs to. Match the tooth count, pitch, and bore to the gear being replaced, since those features decide whether it meshes correctly and mounts on its shaft.
| SKU | RA1077487 |
|---|---|
| Product ID | 14533 |
| Category | Gears & Pinions, Transmission |
| Brand | Raymond |
| Weight | 0.15 lbs |
| Dimensions | 1" L × 1" W × 1" H |
| Type | Gear |
|---|
These are the identifiers for this product. The SKU is the part number we use at Forklifts Etc. when you order. Below that you’ll also see the product ID, the OEM number when we have it, and cross-reference part numbers other manufacturers use for the same item.
| SKU Number | RA1077487 |
|---|---|
| Product ID | 14533 |
| Short Link | https://forkliftsetc.net/?p=14533 |
| Part Number |
|---|
| RA1077487 |
