$101.82
Meshing with a larger gear to transmit motor torque toward the wheels, this Raymond drive pinion gear is the smaller driving gear that sets the gear reduction the drive is built around. It replaces the original in its drive assembly, where worn, chipped, or pitted teeth cause noise, backlash, and eventually a loss of reliable power transfer.
The drive pinion gear is the smaller driving gear in a drive train, meshing with a larger gear to transmit motor torque toward the wheels and set the gear reduction the drive is built around. This Raymond pinion replaces the original in its drive assembly, where worn, chipped, or pitted teeth cause noise, backlash, and eventually a loss of reliable power transfer.
Because a pinion meshes with a specific mating gear, its tooth count, pitch, and bore or shaft interface have to match the assembly exactly. Match the tooth count and mounting interface to the gear being removed so it meshes correctly and transfers torque without excess backlash.
| SKU | RA1154670 |
|---|---|
| Product ID | 11301 |
| Category | Gears & Pinions, Transmission |
| Brand | Raymond |
| Weight | 0.75 lbs |
| Dimensions | 1" L × 1" W × 1" H |
| Type | Gear, Drive Pinion |
|---|---|
| Equipment | Raymond lift trucks |
| Weight (lbs) | 1.00 |
These are the identifiers for this product. The SKU is the part number we use at Forklifts Etc. when you order. Below that you’ll also see the product ID, the OEM number when we have it, and cross-reference part numbers other manufacturers use for the same item.
| SKU Number | RA1154670 |
|---|---|
| Product ID | 11301 |
| Short Link | https://forkliftsetc.net/?p=11301 |
| Part Number |
|---|
| RA1154670 |
