Crown Drive Bearing Cone 529 – RA410-022/10

This tapered roller bearing cone, the inner race of a tapered roller bearing set, is cataloged by Raymond for use in Raymond lift truck drivetrain applications. The cone rides on the tapered rollers and forms half of the complete bearing assembly, working together with its matching outer cup to carry both radial load and the thrust load created when the truck turns or the drivetrain is loaded at an angle.

This cone measures a 2.000 inch bore with a 1.420 inch cone width, dimensions that determine which shaft it mounts on and which matching cup it pairs with; a tapered bearing cone and cup are always sold and fitted as a matched set, so the cup must be sized to the same bearing family to seal properly under load. As with any tapered roller bearing, wear typically appears as roughness, noise, or heat during rotation once the rollers or raceway surface fatigue from repeated load cycles.

At just over 2 pounds, this cone is sized for a mid-size drivetrain shaft rather than a light accessory bearing. Ordering by the manufacturer part number ensures the correct bore and width match the original bearing on the Raymond truck it is replacing.