Thombert Load Wheel Assembly 3.25 x 4.5 x 2.165 – 5386AOA

Thombert supplies this load wheel as a complete assembly, a 3.25 inch Dyalon A polyurethane wheel with its 6006 series bearings pressed into the hub and ready to mount. The wheel is 3.25 inches in outside diameter and 4.5 inches wide on a 2.165 inch bore, a wide-tread, small-diameter build for the load-roller positions that carry weight low on electric pallet and reach trucks. Because the bearings come installed, the replacement bolts on without a press or a separate bearing purchase.

The greasable bearings accept fresh grease at service intervals, which matters on a low load wheel that turns constantly and takes side load through tight maneuvering. Dyalon A polyurethane holds the rated load and resists the flat-spotting and chunking that shorten the life of a softer wheel in the same duty. Thombert documents the assembly as fitment for Crown and MCFA material handling equipment.

Match the 2.165 inch bore and axle diameter to the wheel being replaced before installing, since the assembly is built to seat on a specific shaft. Keep the greasable bearings on a grease schedule matched to how hard the equipment runs.