$2.29
Roller chain runs as a continuous loop, and this ANSI #40 connecting link closes it, joining the two free ends into a working chain. Built to the #40 standard at 0.500 inch pitch in carbon steel, it serves any ANSI #40 chain application regardless of which manufacturer built the machine. Sizing by the ANSI standard is what confirms the right link.
A connecting link is where a roller chain gets opened, shortened, or rejoined without pressing out permanent pins, and this one is built to the ANSI #40 standard. ANSI #40 identifies a 1/2 inch pitch chain size, so the link fits any chain built to that same standard rather than to one maker's proprietary chain. It arrives with its connecting plate and a cotter pin or clip, the hardware that lets a technician close the chain loop by hand at this single link.
Carbon steel construction matches the strength of the ANSI #40 chain it joins, so the link does not become the weak point in the run. Chain in this class carries a minimum tensile strength of roughly 3,205 pounds, and the link is sized to hold that same rating. Because it is a universal ANSI component rather than a brand-specific part, one link serves lift mast chains and drive chains across the range of forklifts that run #40 chain.
Confirm the chain in the application is ANSI #40 before fitting, since master links are not interchangeable between different ANSI chain sizes and a link of the wrong pitch will not close correctly onto the chain.
| SKU | ML-40 |
|---|---|
| Product ID | 14861 |
| OEM Number | 076902-001 |
| Category | Roller Chain |
| Brand | Raymond |
| Weight | 0.05 lbs |
| Dimensions | 1" L × 1" W × 0.5" H |
| Type | Connecting (master) link |
|---|---|
| Chain Size | ANSI #40 |
| Pitch | 0.500 in |
| Roller Diameter | 0.313 in |
| Width Between Inner Plates | 0.310 in |
| Pin Diameter | 0.156 in |
| Plate Height | 0.472 in |
| Material | Carbon steel |
| Minimum Tensile Strength (Chain) | approx 3,205 lb |
| Weight (lbs) | 0.05 |
| Length (in) | 1.00 |
| Width (in) | 1.00 |
| Height (in) | 0.5 |
These are the identifiers for this product. The SKU is the part number we use at Forklifts Etc. when you order. Below that you’ll also see the product ID, the OEM number when we have it, and cross-reference part numbers other manufacturers use for the same item.
| SKU Number | ML-40 |
|---|---|
| Product ID | 14861 |
| Short Link | https://forkliftsetc.net/?p=14861 |
| OEM Number | 076902-001 |
| Part Number |
|---|
| 005913771081 |
| 220002813 |
| 220019905 |
| 3052320 |
| 3123942 |
| 800019301 |
| 800061825 |
| AC0453-00040 |
| AC0928192 |
| AC928192 |
| AD445096 |
| AD56445096 |
| AD895158 |
| ADBE15FIOCT011 |
| AM56445096 |
| AM895158 |
| BC600291 |
| BC660230 |
| BKW006308 |
| BRCK600291 |
| CK895158 |
| CL600291 |
| CL660230 |
| CR076902 |
| CR076902-001 |
| CR076902-1 |
| CR76902 |
| CR76902-001 |
| CR76902-1 |
| CR769021 |
| CT0452-00040 |
| CT045200040 |
| CT0453-00040 |
| CT045300040 |
| CT2I3409 |
| CT9I4650 |
| CTA0000-01063 |
| CTA000001063 |
| CU30871G1 |
| E-3165 |
| E-3733 |
| ET29110 |
| ET29114 |
| ET29180 |
| EZ30871G1 |
| HY0030403 |
| HY1151518 |
| HY1194296 |
| HY30403 |
| HY3052320 |
| HY3123942 |
| HY800019301 |
| KO0453-00040 |
| KO0928192 |
| KO928192 |
| LI600291 |
| LIW006308 |
| LIW8006308 |
| LP789-3737 |
| LP789-3738 |
| LP789-40R |
| MB0452-00040 |
| MB045200040 |
| MB0453-00040 |
| MB045300040 |
| MB2I3409 |
| MB9I4650 |
| MBA0000-01063 |
| MBA000001063 |
| MBMYK0452-00040 |
| MBMYK0453-00040 |
| ML-40C |
| ML-40R |
| ML-CH40 |
| NICK600291 |
| NY045300040 |
| PLML-40R |
| RA680-810 |
| SL8006308 |
| SY40R |
| SYSY40R |
| TCCK600291 |
| TN07112 |
| TN895158 |
| TY00591-37380-81 |
| TY00591-37710-81 |
| TY04451-10080-71 |
| TY044511008071 |
| UK2I3409 |
| VP140887 |
| WG006308 |
| YT220002813 |
| YT220019905 |
